Reverse Osmosis
Reverse osmosis (RO) is a water filtration technique that helps reduce the amount of dissolved or suspended contaminants in water. In this, the unfiltered water undergoes pressure that pushes it through a semipermeable membrane.
The membrane makes sure that all the contaminants are blocked and that only clean water molecules are allowed through. Reverse osmosis water is a low TDS (Total dissolved solids)water suitable for home and industry applications. Here are some of the contaminants that reverse osmosis systems in St Augustine Fl can remove:
- Chlorine
- Minerals
- Salt
- Fluorine
- Arsenic
- Sediment
- Herbicides
- Volatile organic compounds
- Pesticides
- Other dissolvable contaminants
What are the different components used in reverse osmosis?
Now that you know how RO water filtration systems work, you should also learn about the different components that make the system function. Here are the essential reverse osmosis components:
Air gap faucet
All RO water systems require effective backflow management. For example, an air gap faucet prevents backflow, especially in a POU(Point of use) RO system.
Permeate pump
The idea is to produce more usable water without wasting too much water. In other words, an RO system should be efficient enough to reduce the amount of water sent to the drain. A permeate pump does the same job. It reduces the amount of drain water by 85 percent!
RO booster pump
As mentioned earlier, the unfiltered water must be pushed through the semipermeable membrane for filtration. An RO booster pump applies this push or force.
Water softener
Before treating it through an RO system, you need to soften the water first. If you directly treat hard water through RO, chances are that the lifespan of the RO system will decrease.
Which stage Reverse Osmosis system in St. Augustine Fl do you need?
Before we answer that, you should know that every Reverse Osmosis system in St Augustine, Fl has a defined number of pre-filters or post-filters. The number of such filters helps determine the stage of the RO system. Which stage RO system should you use? The different stages of the RO system are 3,4 and 5.
If you have a property in the city, you would require a 4-stage RO system. A 5-stage RO system usually has an additional polishing filter that makes the water pass through carbon — rendering the filtered water safe for drinking and ice makers.
We suggest you consult an RO water filtration system expert to determine the right RO system stage for your specific need.
What are the different reverse osmosis configurations?
Reverse osmosis water filtration systems come with different configurations. As a consumer, you should always be in the know. There are three most common reverse osmosis configurations available in the market:
- Quick-change filter cartridges
- Drop-in filter cartridges
- Standard filter cartridges.
The quick-change filter cartridges are easy to replace, have a low profile, and have a higher maintenance cost. These filters usually have a low profile and higher environmental impact. Drop-in filter cartridges do not require frequent housing replacements. These have a lesser environmental impact and ongoing maintenance costs. However, these will require special-size filter cartridges.
Lastly, the standard filter cartridges, as the name suggests, have standard filters and housings. This makes them easy to replace, although they don’t require frequent replacements. As a result, these filters have the lowest ongoing maintenance cost and are generally more significant than others. However, these require more effort and time when it comes to maintenance.
We provide both residential and commercial RO systems. Connect with our friendly customer representatives and get your RO system installed today!
